Back to Products
Fence Technology

G-Fence 3000

Sorhea

G-FENCE is a shock detection system for perimeter fences.

Product DocumentWatch Video
G-Fence 3000
Shock detection system for fences

Shock detection system for fences

  • EASY INSTALLATION : Standalone solution, little civil engineering
  • RELIABILITY : Distributed intelligence, event filtering
  • EFFICIENCY : Precise location, zoning
G-FENCE detects fence vibrations generated by intrusion attempts

G-FENCE detects fence vibrations generated by intrusion attempts

Attempts by cutting, climbing or pulling out the fence will be detected. The system then transmits alarm information via the MAXIBUS UNIVERSAL Hub.

To limit civil engineering, G-FENCE works autonomously thanks to power supply from solar panels and a batteries that are integrated into each control unit. Unique on the market, the G-FENCE innovation can be used to secure a 3200 m x 4 perimeter while guaranteeing a 1 second alarm response time and a precise intrusion location to within 3 m.

Detection adjustment is very simple. A mapping software application is used to locate zoning by superimposing it over a site plan or picture. Maintenance is facilitated as the product is easy to connect.

Applications

Applications

With its 3200 m of detection per system, G-FENCE is ideal for securing long perimeters. Compatible with all “meshed” fences, the detector cable and its equipment are easy to install on the support and can be easily replaced if the cable is cut during an aggression.

Thanks to the system’s autonomy, civil engineering operations are also limited, and the system can be used on any sensitive site configurations: oil refineries, nuclear power plants, airports, etc., but, above all, on sites where it is not possible to have an electrical power supply at the perimeter fence.

Technical Characteristics

Technical Characteristics

Power supply: Solar panel and battery in each control unit (CU)

Alarm output: CU:
tamperPower supply failure
AUX.1 input contact
AUX.2 input contact
1 intrusion per zone
Perimeter default

Operating Temperature: -35°C to +70°C

System characteristics: 40 sensors per cable / 3200 m of detection per system / 16 Control Units per system

Protection rating: IP55 Management Unit / Termination Unit / IP55 Connection

Recommendations for Installation

Recommendations for Installation

It is important to install a detector cable in the middle of the fence panel with the supplied cableties and to fix a sensor by tightening one of the cable ties on the fence mesh.

To optimise the sensor’s detection, the sensor must be placed in the middle of the panel.

Entrances and gates: use at least a 0.6mm² standard cross-section cable with a maximum length of 200 m perentrance or gate.

Technology

Technology

To secure a fence and detect any intrusion attempt, a detector cable is installed on the fence. During an intrusion, the sensors will detect vibrations on the fence and send information to the Control Units, which in turn analyse the information received before triggering an alarm, or not.

The cable is pre-assembled with easy-to-install sensors helping to reduce installation costs.

Need direct support?

Can't find what you're looking for? Our dedicated support team is here to help with technical inquiries and troubleshooting.

Contact Sales